Technical Data

TYPE : Two pack Base & Catalyst

MIXING RATIO : Part A & Part 8

APPLICATION : By Brush, Airless spray.

D.F.T : Formulation can provide for max of 200 microns per coat However recommend use 80-90 micrens-standard supply Which is adequate and economical.

POT LIFE : One to One & half hour at 30° C.

CURING TIME at 30° C : Touch 1 to 1.30 hours

Handle : 8 to 10 hours

Thorough hardening : 24 hours

Final hardening : One week

SECOND COAT : After 24 hours

THEORETICAL SPREAD RATE : 4 sq meters per liter(on steel)

CORROSION RESISTANCE : High saline, high humid, acid & alkaline conditions

COLOR : In standard colors

REDUCER : RTT 101

PACKING : 3 and 6 liters

PRODUCT CODE

For high saline/high humid conditions : CLEYCOATS (H.S)

For Acid & Alkaline conditions : CLEYCOATS (C.R)

Floor coating : CLEYCOATS (A.S)

(Antistatic coating. Can be coated on epoxy screed).

Surface preparation On Steel Substrate : Surface to be free from grease, oil and other contaminations. Blast clean the surface for loose rust and scaling. if blasting not practical use mechanical tools along with manual chipping and wire brushing. Dust down the surface Recommended application of 'PRIMOPHOS' Rust convertor for effective conversion to phosphatic layer after cleaning. On cement-Mortar substrate: Refer to company site specialists for proper advice on surface preparation and other related data